This is the Maysama Prana Light Therapy Mask. It’s actually the most powerful mask I’ve ever tested—but when it comes to skin rejuvenation and anti-aging, more isn’t necessarily better. In fact, more can not only be a waste of time, but it could potentially cause harm.
Power isn’t the only thing this mask is known for. It also utilizes pulsed light, a feature I haven’t seen in any other mask I’ve tested. Whether that’s beneficial or not is up for debate. Still, despite all of this, you should see good results with this mask.
Want Help Choosing a Red Light Mask? I built my Red Light Mask Guide. An interactive tool that compares the top masks side by side.
This Prana is the first soft-shell, flexible light therapy mask I’ve used that doesn’t have a mouth opening. I put it through my research-backed 100-point scoring system, and at the end, I’ll give the total out of 100, compare it to competitors, and tell you whether this will work for you.
Round 1 — Comfort & Ease of Use
Fit & Wearability — 12.5 / 15
The mask stays firmly in place, is easy to put on and take off, and uses a decent strap system with two adjustable points on each side. The overall feel is snug, which is exactly what you want in a good mask.
Because there’s no mouth opening, you do get pressure against your lips. I don’t recommend using this if you plan on taking calls or chatting to your neighbor while wearing it.
There are also no ventilation holes at the front, so moisture builds up, which isn’t pleasant. The nose area is very clear with no restrictions; it’s easy to breathe, and you get really good skin contact across pretty much all areas of the mask.
The session times are quite short, but due to the lack of ventilation, I was getting a bit of stickiness after each session.
👆 View all my notes and data, or do a comparison between masks, check out my Mask Comparison Table. 👆Easy to use, links to reviews and more!
Operation & Features — 7.5 / 10
The controller is straightforward: three buttons—power, mode, time—and a small screen. It works, but the display could be larger, and the resolution is on the low side. Most functions are intuitive; the one thing I couldn’t figure out without the manual was how to enable pulse mode.
The manual is a nice high-gloss info booklet, and there’s also a quick start guide—both great for first-time users.
Because the mask is flexible silicone, you can wrap it up—great for travel. Charging is USB-C. There are three built-in timers (1, 3, and 9 minutes) and four modes: Red, Red + Near Infrared, Red + Blue, and Near Infrared only.
This is the first mask I’ve used with built-in pulsed light. It pulses at 100 Hz and is disabled by default—you have to turn it on. I won’t dive into the science here; we’ve covered pulse light elsewhere. The important bit: people get amazing results without pulsing. Whether pulsing makes results faster or better is the debate.
The only real downside in this round is that the mask is corded. Otherwise, it would have scored really well.
Round 1 Total: 20 / 25
(12.5/15 Fit & Wearability + 7.5/10 Operation & Features)
Round 2 — Therapeutic Power
Wavelengths — 8 / 10
According to the company, there are four wavelengths. My spectrometer confirms four peaks:
- In Red mode: 630nm and 660nm. These are excellent for surface-level skin texture and blemishes, and help with fine lines and wrinkles. Red wavelengths are the gold standard for skin rejuvenation, so having two is great.
- In Red + Near Infrared: 850nm near infrared—well supported and very popular for deeper penetration, circulation, and collagen/firmness.
- In Red + Blue: 450 nm blue—beneficial for acne and eczema. I appreciate that red is still included here due to its numerous benefits.
My only criticism is that the near infrared power output is quite low relative to the red. Overall, it ticks all the essential boxes for skin rejuvenation.
Dose & Output — 12 / 15
Dosing can be complex. My team and I examined the literature on masks and photobiomodulation and built a dose chart for optimal skin benefits. There’s an optimal range: above it, benefits drop off; too low, you may not get much at all. Dose is measured in J/cm² and factors in power output and time.
Using my spectrometer, I found these LEDs to be quite powerful. Irradiance peaks at up to ~70 mW/cm², with an average of around ~54 mW/cm² across many LEDs—high for a mask.
By default, the Prana runs for 1 minute. With that power, a 1-minute session calculates to about 3.4 J/cm²—slightly below optimal, but still adequate. The manual recommends 6 minutes, which would deliver roughly 19.5 J/cm²—quite high. I think the 3-minute option is much better—it places the dose in the sweet spot. Two back-to-back 1-minute sessions would also work.
Important note on scoring: when I built this template, I committed to scoring based on the default runtime because many people don’t read manuals or change settings—especially if they’re new. You unbox, turn it on, and off you go. It’s controversial, and some masks have been negatively impacted, but I’m sticking to my metrics. That’s why the mask gets 12/15 here (based on the default 1-minute run).
Round 2 Total: 20 / 25
(8/10 Wavelengths + 12/15 Dose & Output)
Round 3 — Coverage
LED Count — 6 / 10
There are 138 LEDs, each dual-chip, so 276 chips total. That’s adequate and better than some, but there are masks with many more chips—I’ve measured 700–800 at the high end.
Zone Coverage — 10.5 / 15
I test 10 facial zones. This is subjective but consistent.
- Forehead & temples: pretty good—better than many masks—but could be slightly higher density with a few more LEDs.
- Crow’s feet: good—there’s an LED right above this area.
- Under-eyes: okay/good, but the LEDs could be positioned a little higher for truly optimal under-eye coverage.
- Nose bridge: doesn’t do well here.
- Nose: There are plenty of LEDs, but coverage could be a bit better.
- Cheeks: no issues.
- Lips: full marks. This is the first flexible mask I’ve tested that fully encloses and covers the entire lips.
- Chin: Some LEDs present, but they could be positioned lower.
- Jawline: not great—same reason as the chin.
A quick note: when a product is pressed against the face, LED count and placement matter a lot because most energy is delivered directly above each LED. For masks or panels off the face, the LED count is less critical because the light spreads more.
Round 3 Total: 16.5 / 25
(6/10 LED Count + 10.5/15 Zone Coverage)
Round 4 — Price & Peace of Mind
Price — 14 / 20
The mask retails at $375. With my discount link, https://aferg.co/maysama, and code ALEX, you can purchase for roughly $340. That’s a fair price for what you’re getting.
Peace of Mind — 2 / 5
The company is ~5 years old and offers a 2-year warranty, which is good. But the 14-day return period is far too short—especially for a product where results take time. That heavily impacts the peace-of-mind score.
Round 4 Total: 16 / 25
(14/20 Price + 2/5 Peace of Mind)
Total Score — 72.5 / 100
The Prana is one of the better masks I’ve tested so far. It isn’t market-leading in any single round, but it’s better than average across most. It’s comfortable, relatively easy to use, and has all the key wavelengths. Although the power numbers are a bit unusual, it performs well overall. Zone coverage is solid, and the price point is reasonable.
I like the two red wavelengths and the fact that it has the most powerful LEDs I’ve tested so far—that will appeal to some, though it’s not necessary for results. The pulse-light feature will also be attractive to those who like pulsing; among the masks I’ve tested, there really haven’t been other options if you specifically want built-in 100 Hz pulsing.
We also have good lip coverage and four different running modes. Downsides: It’s not ideal for talking while wearing the mask, coverage is lacking in certain areas, the LED count could be increased, and the very short returns window is a significant drawback.
Will You See Benefits?
Yes. It has the right wavelengths, adequate power—with plenty in reserve if you need it—and it hits most key areas of the face. Is it worth $340? I think so, for the reasons above. There are cheaper options, but they may have fewer LEDs or fewer features. You can also spend a lot more, but do you need to? Maybe—if you want extra coverage and additional wavelengths like green or amber.
For dosing, I’d personally run 3 minutes or do two 1-minute sessions back-to-back. That keeps you in the optimal range without creeping into potentially too-high territory.
Quick Pros & Cons
Pros
- Most powerful LEDs I’ve tested; high average irradiance (~54 mW/cm²).
- Dual red wavelengths (630 & 660 nm) plus 850 nm NIR and 450 nm blue.
- First flexible mask I’ve tested with full lip coverage.
- Built-in 100 Hz pulse mode (off by default).
- Clear nose area, snug and secure fit, USB-C, and travel-friendly flexible silicone.
- Fair mid-range price; multiple timer and light modes.
Cons
- Corded (mobility trade-off).
- The small, low-res screen makes turning the pulsing option on difficult without reading the manual.
- Moisture build-up and lip pressure; not good for calls/talking.
- Nose bridge and jawline coverage could be better; the LED count is only moderate.
- 14-day returns are too short despite the 2-year warranty.
- The default 1-minute program underdoses unless you change it.
Other Options
- Project E Lumalux Pro — Offers a similar price and scored really well, mainly because it has ~800 LEDs for exceptional coverage. Fit and comfort are similar to Prana. It has one red wavelength (vs two on Prana) but adds amber. It’s about $30 cheaper than Prana.
- Therabody TheraFace Mask — A top-end model featuring a hard-shell design with numerous LEDs, providing excellent coverage and allowing for unrestricted lip coverage. No pulsing, but there’s a built-in vibration mode. Around $650. My wife doesn’t like the weight, so keep that in mind.
- Nanoleaf Mask — $250, it has more chips than Prana, the same flexible wrap-around soft-shell design, and ticks the essentials. Considered by some to be basic, this option includes just the core wavelengths and no pulsing, but you save money.
Final Thoughts
The Maysama Prana is a strong all-rounder with serious power under the hood. It brings multi-wavelength versatility, a unique 100 Hz pulsed mode, solid fit, and respectable coverage. Keep your sessions at 2–3 minutes (or stack short ones), and you’ll stay in the optimal dose zone. If you’re okay with a cord and a short return window, this is absolutely worth a look.
✨ Explore My Website ✨
Discover guides, reviews, and insights to help you make the most of light therapy.
Here are all the products I mentioned
🔥 Maysama PRANA LED Mask, code ALEX for 10% off :https://aferg.co/maysama 🔥 Project E Beauty LED Face Masks, Use code ALEX15 for 15% off: https://aferg.co/projectebeauty
🔥 NanoLeaf LED Face Mask, use code ALEX10 for 10% off :https://aferg.co/nanoleaf
🔥 The Therabody Theraface Mask: no discount code, https://aferg.co/therabody
Have you seen these reviews?
🔴 Why Red Light Therapy Didn’t Stop Me Aging
🔴 CurrentBody Series 2 Mask Review: Unique Design Tested
🔴 New BioMax Pro Panel vs BioMax 9th Gen: Save Your Money
🔴 Biomax Pro Ultra Review: The Most Powerful Panel Yet?
Found This Interesting? Look At These Articles:
🔴 The Red Light Therapy Facial Fat Loss Link: Myth Or Reality?
🔴 Red Light Therapy For Melasma & Hyperpigmentation: Everything You Need To Know
🔴 What Light Therapy Is Best for Rosacea?
🔴 Does Red Light Therapy Help Scars? The Science
Alex's Bio
Alex Fergus wrote this blog post. Alex is an ISSN Sports Nutrition Specialist, Fitness Professional, and certified Superhuman Coach who continues to expand his knowledge base and help people worldwide with their health and wellness. Alex is recognized as the National Record Holder in Powerlifting and Indoor Rowing and has earned the title of the Australian National Natural Bodybuilding Champion. Having worked as a health coach and personal trainer for over a decade, Alex now researches all things health and wellness and shares his findings on this blog.
